GE F13DBX23/841/ECO - 97589

Applications

• Facilities
• Retail Display
• Hospitality
• Office
• Restaurant
• Warehouse

Features

• General Electric F13DBX23/841ECO Ecolux Biax CFL
• 2-Pin Double Biax Bulb
• GE Plug-in Compact Fluorescent Lamp
• High Color Rendering
• Energy Saving
• Biax D ECO 13W 2 Pin

• The F13DBX23/841/ECO GE fluorescent lamps operate at high surface temperatures that can cause serious physical injuries.
• Turn power off and allow adequate time (approximately 10 minutes) for the GE F13DBX23/841/ECO lamp to cool before attempting replacement.
• In order to avoid the risk of electrical shock, make sure the power to the fixture is turned off when replacing the F13DBX23/841/ECO GE.
• The GE F13DBX23/841/ECO lamps are very fragile. Do not drop, crush, bend or shake them.
• The F13DBX23/841/ECO GE fluorescent tubes may shatter with considerable force when broken.
• To ensure that the GE F13DBX23/841/ECO lamps remain in the sockets for the duration of the operation, make sure that the fixture’s sockets are not worn prior to installation of the lamps.
• If the F13DBX23/841/ECO GE lamps are installed in worn sockets, the lamps could fall out of the fixture during operation.
• Never operate GE F13DBX23/841/ECO lamp above or below its rated current voltage.
• Electrical connections should be clean and in good condition. Replace the F13DBX23/841/ECO GE lamp holders and sockets when needed.
• Affix the GE F13DBX23/841/ECO lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to the lamp and socket.
• Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
• F13DBX23/841/ECO GE fluorescent lamp use is not recommended in extreme weather conditions.
• Excessive cold/warm temperatures dramatically affects the GE F13DBX23/841/ECO starting, lamp life and lumen maintenance.