Osram EVC (64657 HLX) - 54255

Applications

• Ophthalmic
• Microfilm
• Microscope
• Projector
• Studio

Features

• Osram HLX 64657 Halogen Bulb
• 64657HLX
• Trackspot Lamp
• Replacement for ZB-EVC
• 54047
• 9700020
• Replacement for 55030036

Equipment

• American DJ Color Pod 250
• American DJ Spot 250
• American DJ Confusion
• American DJ Deluxe Scan 250 4 Ch Scanner
• American DJ Spot 300 Moving Head
• American DJ Electra 250 Mirror Rotate Moon Flower
• American DJ Hyperbeam
• American DJ Orbitron DMX UFO Effect
• American DJ Performancesan DMX Scanner w/Rotating Gobos
• American DJ Rover 250 Barrel Effect Moon Flower
• American DJ Scatter Beam Shower of Colored Beams
• American DJ Splitter Super Moon Flower Effect
• Geni Shiva Scan 250
• Geni Shiva Scan Rotating
• SGM Victory II 250 Scan
• Techni-Lux Flower Cluster (EL-SRL404)

• DANGER! The Osram EVC (64657 HLX) 64657 HLX replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
• Only use the Osram EVC (64657 HLX) replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
• Do not use the 64657 HLX EVC (64657 HLX) Osram replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
• Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
• Do not touch the Osram EVC (64657 HLX) bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
• Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the EVC (64657 HLX) Osram replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
• Never touch the Osram EVC (64657 HLX) lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
• Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
• Always turn off the electrical power before inserting, removing, or cleaning the replacement Osram EVC (64657 HLX) lamp.
• Affix the EVC (64657 HLX) Osram replacement lamp securely in the socket. Improper installation of the Osram EVC (64657 HLX) replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
• Keep the temperature of the Osram EVC (64657 HLX) lamp seal below 350C.
• Keep the temperature of the EVC (64657 HLX) Osram replacement lamp wall above 250C.
• Keep the temperature of the Osram EVC (64657 HLX) 64657 HLX lamp wall below 800C.
• Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
• Osram EVC (64657 HLX) replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
• Operate the Osram EVC (64657 HLX) 64657 HLX replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
• Use an external fuse when required.
• Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.