Osram FCR (64625 HLX) - 54248

Applications

• Dental
• Microfilm
• Microscope
• Projection
• Studio
• X-Ray

Features

• Osram FCR (HLX 64625) Halogen Bulb
• Single Ended Lamp
• FCR 64625HLX
• Low Voltage Bulb
• Replacement for ZB-FCR
• Replacement Lamp for Dental - Fiber Optic Handpiece
• Replacement Lamp for Microscope - Illuminator
• Replacement Lamp for X-Ray - Collimator

Equipment

• Leica 500-037 Microscope
• AO-Reichert 2052 Microscope
• Leica 500-974 Microscope
• Leica LH100 Microscope
• Leica LH100Z Microscope
• Leica LH102Z Microscope
• Leica Biopromar Microscope
• Leica Dialux 20 Microscope
• Leica Orthoplan Microscope
• Nikon 76513 Microscope
• Odyssey LE-105 Colorstar
• Olympus 8C401 Microscope
• Olympus A-LSH-3 Microscope
• Olympus BH-RFL Microscope
• Olympus B-LSH-3 Microscope
• Olympus PME-LSM Microscope
• Swift MA782 Microscope
• Swift Y5 Microscope
• Vickers M32-05-45 Microscope
• Wild/Leitz 193-049 Microscope
• Zeiss 3800-59-1660
• Techni-Lux Matisse LiquidLight (EL-ML351-ML)
• Sachtler Reporter 100H

• DANGER! The Osram FCR (64625 HLX) 64625 HLX replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
• Only use the Osram FCR (64625 HLX) replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
• Do not use the 64625 HLX FCR (64625 HLX) Osram replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
• Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
• Do not touch the Osram FCR (64625 HLX) bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
• Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the FCR (64625 HLX) Osram replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
• Never touch the Osram FCR (64625 HLX) lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
• Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
• Always turn off the electrical power before inserting, removing, or cleaning the replacement Osram FCR (64625 HLX) lamp.
• Affix the FCR (64625 HLX) Osram replacement lamp securely in the socket. Improper installation of the Osram FCR (64625 HLX) replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
• Keep the temperature of the Osram FCR (64625 HLX) lamp seal below 350C.
• Keep the temperature of the FCR (64625 HLX) Osram replacement lamp wall above 250C.
• Keep the temperature of the Osram FCR (64625 HLX) 64625 HLX lamp wall below 800C.
• Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
• Osram FCR (64625 HLX) replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
• Operate the Osram FCR (64625 HLX) 64625 HLX replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
• Use an external fuse when required.
• Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.