M-F 8AM-4:30PM CT
1-800-582-8828
Ushio DDL - 1000173
| Lamp | DDL (JCR20V-150W) |
| Description | 20V 150W 2-Pin (GX5.3) MR16 |
| Brand | Ushio |
| MPN | 1000173 |
| UPC | 048777111413 |
The DDL Ushio 1000173 is a Halogen MR16 20V 150W Lamp with a GX5.3 base.
Specifications for the 1000173 Ushio DDL Replacement Lamp
| GENERAL CHARACTERISTICS | |
| Shape | MR16 |
| Lamp Base | GX5.3 (2-Pin, Round Pins) |
| Filament | CC-6 |
| Bulb Finish | Clear |
| Rated Life | 500 hours |
| Operating Position | BD/Hor |
| PHOTOMETRIC CHARACTERISTICS | |
| Color Temperature | 3150 K |
| ELECTRICAL CHARACTERISTICS | |
| Watts | 150 W |
| Volts | 20 V |
| DIMENSIONS | |
| Maximum Overall Length - MOL | 1.75in (44.50mm) |
| Diameter | 2.00in (50.80mm) |
| PRODUCT INFORMATION | |
| Product Code | 1000173 |
| Family Name | Ushio JCR Series MR-16 Tungsten Halogen Lamps |
| Description | DDL |
| Ordering Code | JCR20V-150W |
| SKU Qty | 1 |
| Case Qty (Price Listed is Per Bulb) | 10 |
| Sales Unit | Each |
| UPC | 048777111413 |
Ushio DDL 1000173 Replacement Bulb Applications & Features
Applications
- Projection
- Microfilm
Features
- Ushio DDL Halogen Bulb
- JCR20V-150W MR16 Lamp
- Dichroic Coated Reflector
- Focused Beam for Optical Applications
- Only for Use in Approved Enclosed Halogen Fixtures
Ushio DDL 1000173 Replacement Lamp
Equipment
- Burton Halogen CoolSpot Surgical Light 0134100
- Burton 0006004
- Burton Bilirubin Blanket
- Heine Y-96.11.103 Endoscope 150W
- Nikon 82931 Fiber Optic Illumination
- Olympus VS010
DDL Ushio Halogen Lamp
- DANGER! The Ushio DDL JCR20V-150W replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use the Ushio DDL replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use the JCR20V-150W DDL Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Ushio DDL bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the DDL Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the Ushio DDL lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio DDL lamp.
- Affix the DDL Ushio replacement lamp securely in the socket. Improper installation of the Ushio DDL replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Ushio DDL lamp seal below 350C.
- Keep the temperature of the DDL Ushio replacement lamp wall above 250C.
- Keep the temperature of the Ushio DDL JCR20V-150W lamp wall below 800C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Ushio DDL replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the Ushio DDL JCR20V-150W replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.