Click for the BBB Business Review of this Lights Bulbs & Tubes in Mount Pleasant IA

Manufacturers

Batteries Alkaline & Rechargeable Emergency Lighting Medical Pager PLC & CNC Scanner Safety Equipment Federal Signal Tomar Industrial Truck & Trailer Whelen Engineering Lamp Type Compact Fluorescent Fluorescent Germicidal Halogen High Intensity Discharge Incandescent LED Miniature & Sealed Beam Specialty & Medical Xenon Lighting Related Ballast Bussmann Fuses Lampholders

Ushio DRA - 1000216

Lamp	DRA (JCD120V-300W)
Description	120V 300W 2-Pin (G6.35) Clear
Brand	Ushio
MPN	1000216
UPC	048777113790

The DRA Ushio 1000216 is a Halogen T5 120V 300W Lamp with a G6.35 base.

Specifications for the 1000216 Ushio DRA Replacement Lamp

GENERAL CHARACTERISTICS
Shape	T5
Lamp Base	G6.35 (Glass 2-Pin)
Filament	CC-6
Bulb Finish	Clear
Rated Life	300 hours
Light Center Length - LCL	1.30in (33.00mm)
Operating Position	BD/Hor

PHOTOMETRIC CHARACTERISTICS
Initial Lumens	6900
Color Temperature	3100 K

ELECTRICAL CHARACTERISTICS
Watts	300 W
Volts	120 V

DIMENSIONS
Maximum Overall Length - MOL	1.97in (50.00mm)
Diameter	0.63in (16.00mm)

PRODUCT INFORMATION
Product Code	1000216
Family Name	Ushio JCD Series Halogen Bi-Pin SSTV & AV Lamps
Description	DRA
Ordering Code	JCD120V-300W
SKU Qty	1
Case Qty (Price Listed is Per Bulb)	10
Sales Unit	Each
UPC	048777113790

Ushio DRA 1000216 Replacement Bulb Applications & Features

Applications

Stage Studio
AV

Features

Ushio DRA (JCD120V-300W) Halogen Bulb
Single Ended Lamp
Only for Use in Approved Enclosed Halogen Fixtures

DRA Ushio Halogen Lamp

DANGER! The Ushio DRA JCD120V-300W replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
Only use the Ushio DRA replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
Do not use the JCD120V-300W DRA Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
Do not touch the Ushio DRA bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the DRA Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
Never touch the Ushio DRA lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio DRA lamp.
Affix the DRA Ushio replacement lamp securely in the socket. Improper installation of the Ushio DRA replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
Keep the temperature of the Ushio DRA lamp seal below 350C.
Keep the temperature of the DRA Ushio replacement lamp wall above 250C.
Keep the temperature of the Ushio DRA JCD120V-300W lamp wall below 800C.
Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
Ushio DRA replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
Operate the Ushio DRA JCD120V-300W replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
Use an external fuse when required.
Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.