M-F 8AM-4:30PM CT
1-800-582-8828
Ushio EJV - 1000302
| Lamp | EJV (JCR21V-150W) |
| Description | 21V 150W 2-Pin (GX5.3) MR16 |
| Brand | Ushio |
| MPN | 1000302 |
| UPC | 048777119679 |
The EJV Ushio 1000302 is a Halogen MR16 21V 150W Lamp with a GX5.3 base.
Specifications for the 1000302 Ushio EJV Replacement Lamp
| GENERAL CHARACTERISTICS | |
| Shape | MR16 |
| Lamp Base | GX5.3 (2-Pin, Round Pins) |
| Filament | CC-6 |
| Bulb Finish | Clear |
| Rated Life | 40 hours |
| Operating Position | BD/Hor |
| PHOTOMETRIC CHARACTERISTICS | |
| Color Temperature | 3400 K |
| ELECTRICAL CHARACTERISTICS | |
| Watts | 150 W |
| Volts | 21 V |
| DIMENSIONS | |
| Maximum Overall Length - MOL | 1.75in (44.50mm) |
| Diameter | 2.00in (50.80mm) |
| PRODUCT INFORMATION | |
| Product Code | 1000302 |
| Family Name | Ushio JCR Series MR-16 Tungsten Halogen Lamps |
| Description | EJV |
| Ordering Code | JCR21V-150W |
| SKU Qty | 1 |
| Case Qty (Price Listed is Per Bulb) | 10 |
| Sales Unit | Each |
| UPC | 048777119679 |
Ushio EJV 1000302 Replacement Bulb Applications & Features
Applications
- Dental
- Projection
Features
- Ushio EJV (JCR21V-150W) Halogen Bulb
- MR16 Lamp
- Dichroic Coated Reflector
- Focused Beam for Optical Applications
- Only for Use in Approved Enclosed Halogen Fixtures
Ushio EJV 1000302 Replacement Lamp
Equipment
- Den-Mat 3904 Visar 2
- Darby 950-9024 Superdent 7500
- Kinetic Instrument 1450 Sunlight 2
- Penn Med 301203 200L Wand
EJV Ushio Halogen Lamp
- DANGER! The Ushio EJV JCR21V-150W replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use the Ushio EJV replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use the JCR21V-150W EJV Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Ushio EJV bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the EJV Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the Ushio EJV lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio EJV lamp.
- Affix the EJV Ushio replacement lamp securely in the socket. Improper installation of the Ushio EJV replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Ushio EJV lamp seal below 350C.
- Keep the temperature of the EJV Ushio replacement lamp wall above 250C.
- Keep the temperature of the Ushio EJV JCR21V-150W lamp wall below 800C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Ushio EJV replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the Ushio EJV JCR21V-150W replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.