Click for the BBB Business Review of this Lights Bulbs & Tubes in Mount Pleasant IA

Manufacturers

Batteries Alkaline & Rechargeable Emergency Lighting Medical Pager PLC & CNC Scanner Safety Equipment Federal Signal Tomar Industrial Truck & Trailer Whelen Engineering Lamp Type Compact Fluorescent Fluorescent Germicidal Halogen High Intensity Discharge Incandescent LED Miniature & Sealed Beam Specialty & Medical Xenon Lighting Related Ballast Bussmann Fuses Lampholders

Ushio EPX - 1000349

Lamp	EPX (JCR14.5V-90W)
Description	14.5V 90W 2-Pin (GX5.3) MR16
Brand	Ushio
MPN	1000349
UPC	048777122891

The EPX Ushio 1000349 is a Halogen MR16 14.5V 90W Lamp with a GX5.3 base.

Specifications for the 1000349 Ushio EPX Replacement Lamp

GENERAL CHARACTERISTICS
Shape	MR16
Lamp Base	GX5.3 (2-Pin, Round Pins)
Filament	CC-6
Bulb Finish	Clear
Rated Life	500 hours
Operating Position	BD/Hor

PHOTOMETRIC CHARACTERISTICS
Color Temperature	3150 K

ELECTRICAL CHARACTERISTICS
Watts	90 W
Volts	14.5 V

DIMENSIONS
Maximum Overall Length - MOL	1.75in (44.50mm)
Diameter	2.00in (50.80mm)

PRODUCT INFORMATION
Product Code	1000349
Family Name	Ushio JCR Series MR-16 Tungsten Halogen Lamps
Description	EPX
Ordering Code	JCR14.5V-90W
SKU Qty	1
Case Qty (Price Listed is Per Bulb)	12
Sales Unit	Each
UPC	048777122891

Ushio EPX 1000349 Replacement Bulb Applications & Features

Features

Ushio EPX (JCR14.5V-90W) Halogen Bulb
MR16 Lamp
Dichroic Coated Reflector
Focused Beam for Optical Applications
Only for Use in Approved Enclosed Halogen Fixtures

EPX Ushio Halogen Lamp

DANGER! The Ushio EPX JCR14.5V-90W replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
Only use the Ushio EPX replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
Do not use the JCR14.5V-90W EPX Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
Do not touch the Ushio EPX bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the EPX Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
Never touch the Ushio EPX lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio EPX lamp.
Affix the EPX Ushio replacement lamp securely in the socket. Improper installation of the Ushio EPX replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
Keep the temperature of the Ushio EPX lamp seal below 350C.
Keep the temperature of the EPX Ushio replacement lamp wall above 250C.
Keep the temperature of the Ushio EPX JCR14.5V-90W lamp wall below 800C.
Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
Ushio EPX replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
Operate the Ushio EPX JCR14.5V-90W replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
Use an external fuse when required.
Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.