Ushio F17T8/830 - 3000231

Applications

• Commercial & Retail Establishments
• Schools
• General Office
• Health Care Facilities

Features

• Advanced Technology Saves Up to 40% on Energy Costs Over T12 Lamps
• High Color Rendering - Up to 85 CRI
• Improved Light Distribution and Quality
• Environmental Asset - Long Life Prevents the Build Up of Discarded Lamps Which Means Less Waste

• The F17T8/830 Ushio fluorescent lamps operate at high surface temperatures that can cause serious physical injuries.
• Turn power off and allow adequate time (approximately 10 minutes) for the Ushio F17T8/830 lamp to cool before attempting replacement.
• In order to avoid the risk of electrical shock, make sure the power to the fixture is turned off when replacing the F17T8/830 Ushio.
• The Ushio F17T8/830 lamps are very fragile. Do not drop, crush, bend or shake them.
• The F17T8/830 Ushio fluorescent tubes may shatter with considerable force when broken.
• To ensure that the Ushio F17T8/830 lamps remain in the sockets for the duration of the operation, make sure that the fixture’s sockets are not worn prior to installation of the lamps.
• If the F17T8/830 Ushio lamps are installed in worn sockets, the lamps could fall out of the fixture during operation.
• Never operate Ushio F17T8/830 lamp above or below its rated current voltage.
• Electrical connections should be clean and in good condition. Replace the F17T8/830 Ushio lamp holders and sockets when needed.
• Affix the Ushio F17T8/830 lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to the lamp and socket.
• Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
• F17T8/830 Ushio fluorescent lamp use is not recommended in extreme weather conditions.
• Excessive cold/warm temperatures dramatically affects the Ushio F17T8/830 starting, lamp life and lumen maintenance.